{"title":"Facadeisoleringsdyvler","description":"\u003cp data-start=\"0\" data-end=\"85\"\u003e\u003cstrong data-start=\"0\" data-end=\"83\"\u003eFacade Insulation Anchors – Secure Thermal Insulation Fixing for All Conditions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"87\" data-end=\"320\"\u003eFacade insulation anchors are designed for the \u003cstrong data-start=\"134\" data-end=\"190\"\u003emechanical fastening of thermal insulation materials\u003c\/strong\u003e — such as mineral wool or polystyrene — to various construction substrates including \u003cstrong data-start=\"276\" data-end=\"317\"\u003econcrete, brick, and aerated concrete\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp data-start=\"322\" data-end=\"452\"\u003eThese anchors provide a \u003cstrong data-start=\"346\" data-end=\"379\"\u003estrong and durable connection\u003c\/strong\u003e, preventing the insulation layer from shifting or deforming over time.\u003c\/p\u003e\n\u003cp data-start=\"454\" data-end=\"496\"\u003e\u003cstrong data-start=\"454\" data-end=\"494\"\u003eThe category includes several types:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"497\" data-end=\"948\"\u003e\n\u003cli data-start=\"497\" data-end=\"585\"\u003e\n\u003cp data-start=\"499\" data-end=\"585\"\u003e\u003cstrong data-start=\"499\" data-end=\"523\"\u003ePlastic nail anchors\u003c\/strong\u003e – for lighter materials and smaller loads; easy to install.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"586\" data-end=\"716\"\u003e\n\u003cp data-start=\"588\" data-end=\"716\"\u003e\u003cstrong data-start=\"588\" data-end=\"611\"\u003eMetal screw anchors\u003c\/strong\u003e – for heavier insulation panels and higher load capacity; excellent performance even on large façades.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"717\" data-end=\"847\"\u003e\n\u003cp data-start=\"719\" data-end=\"847\"\u003e\u003cstrong data-start=\"719\" data-end=\"771\"\u003eRecessed anchors with extended insulation plates\u003c\/strong\u003e – minimize heat loss through fixing points and eliminate thermal bridges.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"848\" data-end=\"948\"\u003e\n\u003cp data-start=\"850\" data-end=\"948\"\u003e\u003cstrong data-start=\"850\" data-end=\"887\"\u003eAnchors with insertable head caps\u003c\/strong\u003e – ensure a neat appearance and improved energy efficiency.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"950\" data-end=\"967\"\u003e\u003cstrong data-start=\"950\" data-end=\"965\"\u003eAdvantages:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"968\" data-end=\"1292\" data-is-last-node=\"\" data-is-only-node=\"\"\u003e\n\u003cli data-start=\"968\" data-end=\"1050\"\u003e\n\u003cp data-start=\"970\" data-end=\"1050\"\u003eCompatible with all \u003cstrong data-start=\"990\" data-end=\"1047\"\u003eETICS (External Thermal Insulation Composite Systems)\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1051\" data-end=\"1136\"\u003e\n\u003cp data-start=\"1053\" data-end=\"1136\"\u003eAvailable in \u003cstrong data-start=\"1066\" data-end=\"1085\"\u003evarious lengths\u003c\/strong\u003e depending on insulation thickness and wall type.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1137\" data-end=\"1200\"\u003e\n\u003cp data-start=\"1139\" data-end=\"1200\"\u003eHigh \u003cstrong data-start=\"1144\" data-end=\"1167\"\u003epull-out resistance\u003c\/strong\u003e, even under strong wind loads.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1201\" data-end=\"1292\" data-is-last-node=\"\"\u003e\n\u003cp data-start=\"1203\" data-end=\"1292\" data-is-last-node=\"\"\u003e\u003cstrong data-start=\"1203\" data-end=\"1216\"\u003eCertified\u003c\/strong\u003e according to EU building standards and \u003cstrong data-start=\"1256\" data-end=\"1269\"\u003eCE marked\u003c\/strong\u003e for quality assurance.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"insulation-anchor-with-metal-nail-10x180mm-60mm-plate","title":"Insulation Anchor with Metal Nail 10x180mm (60mm Plate)","description":"\u003cp\u003e180 mm long insulation anchor with polyamide plug and extended expansion zone – Ø10 mm, Ø60 mm pressure plate. \u003c\/p\u003e\n\u003cp\u003eSafe, effective, and durable solution for the mechanical fastening of thermal insulation materials on various substrates.\u003c\/p\u003e\n\u003cp\u003eLIPMO insulation anchor with polyamide coating ensures reliable anchoring in different construction materials – including concrete, brick, and lightweight concrete. It is suitable for facade insulation systems (ETICS), where high pull-out resistance and firm mechanical fixation are required.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAdvantages:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10 mm drill diameter – universal and quick installation\u003c\/li\u003e\n\u003cli\u003e60 mm pressure plate – larger contact surface for insulation material\u003c\/li\u003e\n\u003cli\u003eExtended expansion zone – improved grip on problematic substrates\u003c\/li\u003e\n\u003cli\u003eGalvanized steel nail with polyamide head – high mechanical strength and corrosion protection\u003c\/li\u003e\n\u003cli\u003eCertified solution – complies with European Technical Assessment (ETA)\u003c\/li\u003e\n\u003cli\u003eSuitable for use in concrete, brick, and lightweight concrete, including perforated blocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eTechnical Information:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDrill diameter: 10 mm\u003c\/li\u003e\n\u003cli\u003eMinimum drill depth: ≥ 90 mm\u003c\/li\u003e\n\u003cli\u003eAnchoring depth: ≥ 80 mm\u003c\/li\u003e\n\u003cli\u003ePressure plate diameter: 60 mm\u003c\/li\u003e\n\u003cli\u003eMaterials:\u003c\/li\u003e\n\u003cli\u003e– Connector: polypropylene (PP)\u003c\/li\u003e\n\u003cli\u003e– Nail: steel, galvanized, with polyamide coating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"5\" cellspacing=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipmo-1.png\" alt=\"1. step\" width=\"150\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipmo-2.png\" alt=\"2. step\" width=\"150\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipmo-3.png\" alt=\"3. step\" width=\"150\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipmo-4.png\" alt=\"4. step\" width=\"150\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1) Drill a hole in the wall \u003c\/td\u003e\n\u003ctd\u003e2) Insert the anchor into the hole\u003c\/td\u003e\n\u003ctd\u003e3) Secure the anchor by driving in the nails\u003c\/td\u003e\n\u003ctd\u003e4) Properly installed insulation connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme1.png?v=1759230754\"\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum substrate thickness — \u003cb\u003eh\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum distance between anchors — \u003cb\u003eSmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum distance between anchor and substrate - \u003cb\u003eCmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme-2.png?v=1759230755\"\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable border=\"0\" cellpadding=\"10\" cellspacing=\"0\" style=\"text-align: center;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipmo-1.png\" alt=\"1. step\" width=\"150\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipmo-2.png\" alt=\"2. step\" width=\"150\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipmo-3.png\" alt=\"3. step\" width=\"150\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipmo-4.png\" alt=\"4. step\" width=\"150\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1) Drill a hole in the wall \u003c\/td\u003e\n\u003ctd\u003e2) Insert the anchor into the hole\u003c\/td\u003e\n\u003ctd\u003e3) Secure the anchor by driving in the nails\u003c\/td\u003e\n\u003ctd\u003e4) Properly installed insulation connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cimg id=\"el-image-1\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme1.png?v=1759230754\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum substrate thickness — \u003cb\u003eh\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum distance between anchors — \u003cb\u003eSmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum distance between anchor and substrate - \u003cb\u003eCmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cimg id=\"el-image-111\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme-2.png?v=1759230755\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable border=\"0\" cellpadding=\"10\" cellspacing=\"0\" style=\"text-align: center;\"\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSuitable for:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInsulation systems (ETICS)\u003c\/li\u003e\n\u003cli\u003eSecuring mineral wool, polystyrene, and other insulation materials\u003c\/li\u003e\n\u003cli\u003eInstallation on concrete, brick, lightweight concrete, and aerated concrete\u003c\/li\u003e\n\u003cli\u003eNew constructions and renovations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4PRO","offers":[{"title":"Default Title","offer_id":56272496066905,"sku":"LIPMO\/110180","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/siltumizolacijas-dibelis-ar-terauda-naglu.png?v=1773213122"},{"product_id":"insulation-anchor-with-metal-nail-10x200mm-60mm-plate","title":"Insulation Anchor with Metal Nail 10x200mm (60mm Plate)","description":"\u003cp\u003e180 mm long insulation anchor with polyamide plug and extended expansion zone – Ø10 mm, Ø60 mm pressure plate. \u003c\/p\u003e\n\u003cp\u003eA secure, effective, and durable solution for the mechanical fastening of thermal insulation materials to various substrates.\u003c\/p\u003e\n\u003cp\u003eLIPMO insulation anchor with a polyamide-coated plug and extended expansion zone ensures reliable anchoring in various construction materials – including concrete, brick, and lightweight concrete. It is suitable for facade insulation systems (ETICS), where high resistance to pull-out and firm mechanical fixation is required.\u003c\/p\u003e\n\u003cp\u003e\n\u003cb\u003eAdvantages:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10 mm drill hole diameter – universal and quick installation\u003c\/li\u003e\n\u003cli\u003e60 mm pressure plate – larger contact surface for insulation material\u003c\/li\u003e\n\u003cli\u003eExtended expansion zone – improved grip even on problematic substrates\u003c\/li\u003e\n\u003cli\u003eGalvanized carbon steel plug with polyamide head – high mechanical strength and corrosion protection\u003c\/li\u003e\n\u003cli\u003eCertified solution – complies with European Technical Assessment (ETA)\u003c\/li\u003e\n\u003cli\u003eSuitable for use in concrete, brick, and lightweight concrete, including perforated blocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cb\u003e Technical Information:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDrill hole diameter: 10 mm\u003c\/li\u003e\n\u003cli\u003eMinimum drill depth: ≥ 90 mm\u003c\/li\u003e\n\u003cli\u003eAnchoring depth: ≥ 80 mm\u003c\/li\u003e\n\u003cli\u003ePressure plate diameter: 60 mm\u003c\/li\u003e\n\u003cli\u003eMaterials:\u003c\/li\u003e\n\u003cli\u003e – Connector: polypropylene (PP)\u003c\/li\u003e\n\u003cli\u003e – Plug: carbon steel, galvanized, with polyamide coating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"5\" cellspacing=\"0\"\u003e \u003ctr\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipmo-2.png\" alt=\"Step 2\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipmo-3.png\" alt=\"Step 3\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipmo-4.png\" alt=\"Step 4\" width=\"150\"\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e1) Drill the wall\u003c\/td\u003e \u003ctd\u003e2) Insert the anchor into the hole\u003c\/td\u003e \u003ctd\u003e3) Secure the anchor by driving in the plug\u003c\/td\u003e \u003ctd\u003e4) Properly installed insulation connector\u003c\/td\u003e \u003c\/tr\u003e \n\u003ctbody\u003e\n\u003c\/tbody\u003e\n\u003ctbody\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme1.png?v=1759230754\"\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum substrate thickness — \u003cb\u003eh\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum connector spacing — \u003cb\u003eSmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum distance between anchor and substrate - \u003cb\u003eCmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme-2.png?v=1759230755\"\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003ctable border=\"0\" cellpadding=\"10\" cellspacing=\"0\" style=\"text-align: center;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipmo-1.png\" alt=\"Step 1\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipmo-2.png\" alt=\"Step 2\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipmo-3.png\" alt=\"Step 3\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipmo-4.png\" alt=\"Step 4\" width=\"150\"\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e1) Drill the wall\u003c\/td\u003e \u003ctd\u003e2) Insert the anchor into the hole\u003c\/td\u003e \u003ctd\u003e3) Secure the anchor by driving in the plug\u003c\/td\u003e \u003ctd\u003e4) Properly installed insulation connector\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ctable class=\"table table-bordered\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e\u003cimg id=\"el-image-1\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme1.png?v=1759230754\"\u003e\u003cbr\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ctable class=\"table table-bordered\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum substrate thickness — \u003cb\u003eh\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum connector spacing — \u003cb\u003eSmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum distance between anchor and substrate - \u003cb\u003eCmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cimg id=\"el-image-111\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme-2.png?v=1759230755\"\u003e\u003cbr\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"0\" cellpadding=\"10\" cellspacing=\"0\" style=\"text-align: center;\"\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSuitable for:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInsulation systems (ETICS)\u003c\/li\u003e\n\u003cli\u003eSecuring mineral wool, foam, and other insulation materials\u003c\/li\u003e\n\u003cli\u003eInstallation on concrete, brick, lightweight concrete, and aerated concrete\u003c\/li\u003e\n\u003cli\u003eNew constructions and renovations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4PRO","offers":[{"title":"Default Title","offer_id":56272503374169,"sku":"LIPMO\/110200","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/siltumizolacijas-dibelis-ar-terauda-naglu.png?v=1773213122"},{"product_id":"insulation-anchor-with-metal-nail-10x220mm-60mm-plate","title":"Insulation Anchor with Metal Nail 10x220mm (60mm Plate)","description":"\u003cp\u003e180 mm long insulation anchor with polyamide plug and extended expansion zone – Ø10 mm, Ø60 mm pressure plate. \u003c\/p\u003e\n\u003cp\u003eA safe, effective, and durable solution for the mechanical fastening of thermal insulation materials to various substrates.\u003c\/p\u003e\n\u003cp\u003eLIPMO insulation anchor with a polyamide-coated plug and extended expansion zone ensures reliable anchoring in various construction materials – including concrete, brick, and lightweight concrete. It is suitable for facade insulation systems (ETICS), where high pull-out resistance and firm mechanical fixation are required.\u003c\/p\u003e\n\u003cp\u003e\n\u003cb\u003eAdvantages:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10 mm drill diameter – universal and quick installation\u003c\/li\u003e\n\u003cli\u003e60 mm pressure plate – larger contact area for insulation material\u003c\/li\u003e\n\u003cli\u003eExtended expansion zone – improved grip even on problematic substrates\u003c\/li\u003e\n\u003cli\u003eGalvanized carbon steel plug with a polyamide head – high mechanical strength and corrosion protection\u003c\/li\u003e\n\u003cli\u003eCertified solution – complies with European Technical Assessment (ETA)\u003c\/li\u003e\n\u003cli\u003eSuitable for use in concrete, brick, and lightweight concrete, including perforated blocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cb\u003eTechnical Information:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDrill diameter: 10 mm\u003c\/li\u003e\n\u003cli\u003eMinimum drill depth: ≥ 90 mm\u003c\/li\u003e\n\u003cli\u003eAnchoring depth: ≥ 80 mm\u003c\/li\u003e\n\u003cli\u003ePressure plate diameter: 60 mm\u003c\/li\u003e\n\u003cli\u003eMaterials:\u003c\/li\u003e\n\u003cli\u003e – connector: polypropylene (PP)\u003c\/li\u003e\n\u003cli\u003e – plug: carbon steel, galvanized, with polyamide coating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"5\" cellspacing=\"0\"\u003e \u003ctr\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipmo-2.png\" alt=\"2. step\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipmo-3.png\" alt=\"3. step\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipmo-4.png\" alt=\"4. step\" width=\"150\"\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e1) Drill the hole in the wall \u003c\/td\u003e \u003ctd\u003e2) Insert the anchor into the hole\u003c\/td\u003e \u003ctd\u003e3) Secure the anchor by driving in the plug\u003c\/td\u003e \u003ctd\u003e4) Correctly installed insulation connector\u003c\/td\u003e \u003c\/tr\u003e \n\u003ctbody\u003e\n\u003c\/tbody\u003e\n\u003ctbody\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme1.png?v=1759230754\"\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum substrate thickness — \u003cb\u003eh\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum distance between anchors — \u003cb\u003eSmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum distance between anchor and substrate - \u003cb\u003eCmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme-2.png?v=1759230755\"\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003ctable border=\"0\" cellpadding=\"10\" cellspacing=\"0\" style=\"text-align: center;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipmo-1.png\" alt=\"1. step\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipmo-2.png\" alt=\"2. step\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipmo-3.png\" alt=\"3. step\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipmo-4.png\" alt=\"4. step\" width=\"150\"\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e1) Drill the hole in the wall \u003c\/td\u003e \u003ctd\u003e2) Insert the anchor into the hole\u003c\/td\u003e \u003ctd\u003e3) Secure the anchor by driving in the plug\u003c\/td\u003e \u003ctd\u003e4) Correctly installed insulation connector\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ctable class=\"table table-bordered\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e\u003cimg id=\"el-image-1\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme1.png?v=1759230754\"\u003e\u003cbr\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ctable class=\"table table-bordered\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum substrate thickness — \u003cb\u003eh\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum distance between connectors — \u003cb\u003eSmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum distance between anchor and substrate - \u003cb\u003eCmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cimg id=\"el-image-111\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme-2.png?v=1759230755\"\u003e\u003cbr\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"0\" cellpadding=\"10\" cellspacing=\"0\" style=\"text-align: center;\"\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSuitable for:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInsulation systems (ETICS)\u003c\/li\u003e\n\u003cli\u003eSecuring mineral wool, foam, and other insulation materials\u003c\/li\u003e\n\u003cli\u003eInstallation on concrete, brick, lightweight concrete, and aerated concrete\u003c\/li\u003e\n\u003cli\u003eNew constructions and renovations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4PRO","offers":[{"title":"Default Title","offer_id":56272506421593,"sku":"LIPMO\/110220","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/siltumizolacijas-dibelis-ar-terauda-naglu.png?v=1773213122"},{"product_id":"insulation-fastening-washer-o140-mm","title":"Insulation Fastening Washer Ø140 mm","description":"\u003cp\u003eReliable insulation fastening with an increased support surface – particularly suitable for mineral wool.\u003c\/p\u003e\n\u003cp\u003eThe pressure washer Ø140 mm is designed for use with insulation fasteners to ensure a firm and secure attachment of mineral wool to facades or other structures. Thanks to the enlarged surface, the washer helps distribute the load evenly, prevents material embedment, and increases pull-out resistance.\u003c\/p\u003e\n\u003cp\u003e\n\u003cb\u003eAdvantages:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased contact surface (Ø140 mm) – improved load distribution on soft materials, especially mineral wool\u003c\/li\u003e\n\u003cli\u003eReduces the risk of embedment and deformation in thermal insulation materials\u003c\/li\u003e\n\u003cli\u003eSuitable for facade insulation systems (ETICS)\u003c\/li\u003e\n\u003cli\u003eCompatible with popular insulation plugs\u003c\/li\u003e\n\u003cli\u003eQuick and easy installation with mechanical fasteners\u003c\/li\u003e\n\u003cli\u003eDurable construction – suitable for long-term use in various conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cb\u003eTechnical Information:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDiameter: 140 mm\u003c\/li\u003e\n\u003cli\u003eSuitable for insulation type: mineral wool\u003c\/li\u003e\n\u003cli\u003eCompatibility: ŁIMO, ŁIPMO, and similar types of insulation plugs\u003c\/li\u003e\n\u003cli\u003eApplication: mechanical fastening with plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cb\u003eApplication:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFastening mineral wool to facades\u003c\/li\u003e\n\u003cli\u003eETICS (external thermal insulation composite systems)\u003c\/li\u003e\n\u003cli\u003eNew builds and renovations\u003c\/li\u003e\n\u003cli\u003eIndustrial and residential buildings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable border=\"0\" cell alt=\"Image 1\" width=\"150\"\u003e  \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/08\/kwl22.png\" alt=\"Image 2\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/08\/kwl3.png\" alt=\"Image 3\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/08\/kwl4.png\" alt=\"Image 4\" width=\"150\"\u003e \u003c\/td\u003e  \u003ctr\u003e \u003ctd colspan=\"4\"\u003e Insulation fastening with insulation plugs using additional washers.\u003c\/td\u003e \u003c\/tr\u003e \n\u003c\/table\u003e \u003cp\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n\u003cbr\u003e\n\u003c\/p\u003e","brand":"4PRO","offers":[{"title":"Default Title","offer_id":56272510943577,"sku":"KWL140","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/izolacijas-dibelu-paplaksne.png?v=1759308115"},{"product_id":"insulation-anchor-with-plastic-nail-10x160mm-60mm-plate","title":"Insulation Anchor with Plastic Nail 10x160mm (60mm Plate)","description":"\u003cp\u003eLightweight, durable, and effective fastening of insulation materials – suitable for both new constructions and renovations.\u003c\/p\u003e\n\u003cp\u003eLIPN insulation anchor 10 × 160 mm with a plastic (polyamide) nail and extended expansion zone is designed for the mechanical installation of thermal insulation materials (e.g., mineral wool, foam) on various substrates – concrete, bricks, aerated concrete, etc. It is a lightweight yet mechanically robust solution, thanks to the glass-fiber reinforced polyamide.\u003c\/p\u003e\n\u003cp\u003e\n\u003cb\u003eAdvantages:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtended expansion zone – secure fixation even on porous or non-standard substrates\u003c\/li\u003e\n\u003cli\u003eGlass-fiber reinforced polyamide nail – high resistance to pull-out and breakage\u003c\/li\u003e\n\u003cli\u003e60 mm pressure plate – evenly distributes load without damaging insulation material\u003c\/li\u003e\n\u003cli\u003eLightweight and metal-free – eliminates thermal bridges, ideal for ETICS systems\u003c\/li\u003e\n\u003cli\u003eEuropean Technical Assessment (ETA) – guarantee of quality and compliance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cb\u003e Technical Information:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDrill diameter: 10 mm\u003c\/li\u003e\n\u003cli\u003eDrill depth: ≥ 90 mm\u003c\/li\u003e\n\u003cli\u003eEffective anchoring depth: ≥ 80 mm\u003c\/li\u003e\n\u003cli\u003ePressure plate diameter: 60 mm\u003c\/li\u003e\n\u003cli\u003eAnchor material: polypropylene (PP)\u003c\/li\u003e\n\u003cli\u003eNail material: glass-fiber reinforced polyamide\u003c\/li\u003e\n\u003cli\u003eCertification: ETA (European Technical Assessment)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"5\" cellspacing=\"0\"\u003e \u003ctr\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-2.png\" alt=\"2. step\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-3.png\" alt=\"3. step\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-4.png\" alt=\"4. step\" width=\"150\"\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e1) Drill a hole in the wall \u003c\/td\u003e \u003ctd\u003e2) Insert the anchor into the hole\u003c\/td\u003e \u003ctd\u003e3) Secure the anchor by inserting the plugs\u003c\/td\u003e \u003ctd\u003e4) Correctly installed insulation connector\u003c\/td\u003e \u003c\/tr\u003e \n\u003ctbody\u003e\n\u003c\/tbody\u003e\n\u003ctbody\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme1.png?v=1759230754\"\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum substrate thickness — \u003cb\u003eh\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum connector distance — \u003cb\u003eSmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum distance between anchor and substrate - \u003cb\u003eCmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme-2.png?v=1759230755\"\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003ctable border=\"0\" cellpadding=\"10\" cellspacing=\"0\" style=\"text-align: center;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-1.png\" alt=\"1. step\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-2.png\" alt=\"2. step\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-3.png\" alt=\"3. step\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-4.png\" alt=\"4. step\" width=\"150\"\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e1) Drill a hole in the wall \u003c\/td\u003e \u003ctd\u003e2) Insert the anchor into the hole\u003c\/td\u003e \u003ctd\u003e3) Secure the anchor by inserting the plugs\u003c\/td\u003e \u003ctd\u003e4) Correctly installed insulation connector\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ctable class=\"table table-bordered\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e\u003cimg id=\"el-image-1\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme1.png?v=1759230754\"\u003e\u003cbr\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ctable class=\"table table-bordered\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum substrate thickness — \u003cb\u003eh\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum connector distance — \u003cb\u003eSmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum distance between anchor and substrate - \u003cb\u003eCmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cimg id=\"el-image-111\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme-2.png?v=1759230755\"\u003e\u003cbr\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"0\" cellpadding=\"10\" cellspacing=\"0\" style=\"text-align: center;\"\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSuitable for:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInsulation systems (ETICS)\u003c\/li\u003e\n\u003cli\u003eFastening mineral wool, foam, and other insulation materials\u003c\/li\u003e\n\u003cli\u003eInstallation on concrete, bricks, lightweight concrete, and aerated concrete\u003c\/li\u003e\n\u003cli\u003eNew constructions and renovations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4PRO","offers":[{"title":"Default Title","offer_id":56272513827161,"sku":"LIPN10160","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/siltumizolacijas-dibelis-ar-plastmasas-naglu.png?v=1773153381"},{"product_id":"insulation-anchor-with-plastic-nail-10x200mm-60mm-plate","title":"Insulation Anchor with Plastic Nail 10x200mm (60mm Plate)","description":"\u003cp\u003eLightweight, durable, and effective fastening of insulation materials – suitable for both new constructions and renovations.\u003c\/p\u003e\n\u003cp\u003eLIPN insulation anchor 10 × 200 mm with a plastic (polyamide) nail and extended expansion zone is designed for the mechanical installation of thermal insulation materials (e.g., mineral wool, foam) on various substrates – concrete, bricks, aerated concrete, etc. It is a lightweight yet mechanically robust solution, thanks to the glass fiber reinforced polyamide.\u003c\/p\u003e\n\u003cp\u003e\n\u003cb\u003eAdvantages:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtended expansion zone – secure fixation even on porous or non-standard substrates\u003c\/li\u003e\n\u003cli\u003eGlass fiber reinforced polyamide nail – high resistance to pull-out and breakage\u003c\/li\u003e\n\u003cli\u003e60 mm pressure plate – evenly distributes load without damaging the insulation material\u003c\/li\u003e\n\u003cli\u003eLightweight and metal-free – no thermal bridges, ideal for ETICS systems\u003c\/li\u003e\n\u003cli\u003eEuropean Technical Assessment (ETA) – guarantee of quality and compliance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cb\u003e Technical Information:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDrill diameter: 10 mm\u003c\/li\u003e\n\u003cli\u003eDrill depth: ≥ 90 mm\u003c\/li\u003e\n\u003cli\u003eEffective anchoring depth: ≥ 80 mm\u003c\/li\u003e\n\u003cli\u003ePressure plate diameter: 60 mm\u003c\/li\u003e\n\u003cli\u003eAnchor material: polypropylene (PP)\u003c\/li\u003e\n\u003cli\u003eNail material: glass fiber reinforced polyamide\u003c\/li\u003e\n\u003cli\u003eCertification: ETA (European Technical Assessment)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"5\" cellspacing=\"0\"\u003e \u003ctr\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-1.png\" alt=\"1. step\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-2.png\" alt=\"2. step\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-3.png\" alt=\"3. step\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-4.png\" alt=\"4. step\" width=\"150\"\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e1) Drill a hole in the wall \u003c\/td\u003e \u003ctd\u003e2) Insert the anchor into the hole\u003c\/td\u003e \u003ctd\u003e3) Secure the anchor by inserting the plugs\u003c\/td\u003e \u003ctd\u003e4) Properly installed insulation connector\u003c\/td\u003e \u003c\/tr\u003e \n\u003ctbody\u003e\n\u003c\/tbody\u003e\n\u003ctbody\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme1.png?v=1759230754\"\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum substrate thickness — \u003cb\u003eh\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum distance between connectors — \u003cb\u003eSmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum distance between anchor and substrate - \u003cb\u003eCmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme-2.png?v=1759230755\"\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003ctable border=\"0\" cellpadding=\"10\" cellspacing=\"0\" style=\"text-align: center;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-1.png\" alt=\"1. step\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-2.png\" alt=\"2. step\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-3.png\" alt=\"3. step\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-4.png\" alt=\"4. step\" width=\"150\"\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e1) Drill a hole in the wall \u003c\/td\u003e \u003ctd\u003e2) Insert the anchor into the hole\u003c\/td\u003e \u003ctd\u003e3) Secure the anchor by inserting the plugs\u003c\/td\u003e \u003ctd\u003e4) Properly installed insulation connector\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ctable class=\"table table-bordered\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e\u003cimg id=\"el-image-1\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme1.png?v=1759230754\"\u003e\u003cbr\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ctable class=\"table table-bordered\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum substrate thickness — \u003cb\u003eh\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum distance between connectors — \u003cb\u003eSmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum distance between anchor and substrate - \u003cb\u003eCmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cimg id=\"el-image-111\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme-2.png?v=1759230755\"\u003e\u003cbr\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"0\" cellpadding=\"10\" cellspacing=\"0\" style=\"text-align: center;\"\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSuitable for:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInsulation systems (ETICS)\u003c\/li\u003e\n\u003cli\u003eFastening mineral wool, foam, and other insulation materials\u003c\/li\u003e\n\u003cli\u003eInstallation on concrete, bricks, lightweight concrete, and aerated concrete\u003c\/li\u003e\n\u003cli\u003eNew constructions and renovations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4PRO","offers":[{"title":"Default Title","offer_id":56272523690329,"sku":"LIPN10200","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/siltumizolacijas-dibelis-ar-plastmasas-naglu.png?v=1773153381"},{"product_id":"insulation-anchor-with-plastic-nail-10x260mm-60mm-plate","title":"Insulation Anchor with Plastic Nail 10x260mm (60mm Plate)","description":"\u003cp\u003eLightweight, durable, and effective fastening of insulation materials – suitable for both new constructions and renovations.\u003c\/p\u003e\n\u003cp\u003eLIPN insulation anchor 10 × 260 mm with plastic (polyamide) nail and extended expansion zone is designed for the mechanical installation of thermal insulation materials (e.g., mineral wool, foam) on various substrates – concrete, bricks, aerated concrete, etc. It is a lightweight yet mechanically robust solution, thanks to the glass fiber reinforced polyamide.\u003c\/p\u003e\n\u003cp\u003e\n\u003cb\u003eAdvantages:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtended expansion zone – secure fixation even on porous or non-standard substrates\u003c\/li\u003e\n\u003cli\u003eGlass fiber reinforced polyamide nail – high resistance to pull-out and breakage\u003c\/li\u003e\n\u003cli\u003e60 mm pressure plate – evenly distributes load without damaging the insulation material\u003c\/li\u003e\n\u003cli\u003eLightweight and metal-free – no thermal bridges, ideal for ETICS systems\u003c\/li\u003e\n\u003cli\u003eEuropean Technical Assessment (ETA) – guarantee of quality and compliance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cb\u003eTechnical Information:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDrill diameter: 10 mm\u003c\/li\u003e\n\u003cli\u003eDrill depth: ≥ 90 mm\u003c\/li\u003e\n\u003cli\u003eEffective anchoring depth: ≥ 80 mm\u003c\/li\u003e\n\u003cli\u003ePressure plate diameter: 60 mm\u003c\/li\u003e\n\u003cli\u003eAnchor material: polypropylene (PP)\u003c\/li\u003e\n\u003cli\u003eNail material: glass fiber reinforced polyamide\u003c\/li\u003e\n\u003cli\u003eCertification: ETA (European Technical Assessment)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"5\" cellspacing=\"0\"\u003e \u003ctr\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-1.png\" alt=\"Step 1\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-2.png\" alt=\"Step 2\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-3.png\" alt=\"Step 3\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-4.png\" alt=\"Step 4\" width=\"150\"\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e1) Drill a hole in the wall \u003c\/td\u003e \u003ctd\u003e2) Insert the anchor into the hole\u003c\/td\u003e \u003ctd\u003e3) Secure the anchor by inserting the plug\u003c\/td\u003e \u003ctd\u003e4) Correctly installed insulation connector\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme1.png?v=1759230754\"\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum substrate thickness — \u003cb\u003eh\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum distance between connectors — \u003cb\u003eSmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum distance between anchor and substrate - \u003cb\u003eCmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme-2.png?v=1759230755\"\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003ctable border=\"0\" cellpadding=\"10\" cellspacing=\"0\" style=\"text-align: center;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\n\u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-1.png\" alt=\"Step 1\" width=\"150\"\u003e \n\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\n\u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-2.png\" alt=\"Step 2\" width=\"150\"\u003e \n\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\n\u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-3.png\" alt=\"Step 3\" width=\"150\"\u003e \n\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\n\u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-4.png\" alt=\"Step 4\" width=\"150\"\u003e \n\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1) Drill a hole in the wall \u003c\/td\u003e\n\u003ctd\u003e2) Insert the anchor into the hole\u003c\/td\u003e\n\u003ctd\u003e3) Secure the anchor by inserting the plug\u003c\/td\u003e\n\u003ctd\u003e4) Correctly installed insulation connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\n\u003cb\u003eSuitable for:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInsulation systems (ETICS)\u003c\/li\u003e\n\u003cli\u003eFastening of mineral wool, foam, and other insulation materials\u003c\/li\u003e\n\u003cli\u003eInstallation on concrete, bricks, lightweight concrete, and aerated concrete\u003c\/li\u003e\n\u003cli\u003eNew constructions and renovations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4PRO","offers":[{"title":"Default Title","offer_id":56272530112857,"sku":"LIPN10260","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/siltumizolacijas-dibelis-ar-plastmasas-naglu.png?v=1773153381"},{"product_id":"insulation-anchor-with-plastic-nail-10x160mm-60mm-plate-short-expansion-zone","title":"Insulation Anchor with Plastic Nail 10x160mm (60mm Plate, Short Expansion Zone)","description":"\u003cp\u003eFast installation and reliable fixation – ideally suited for effective thermal insulation reinforcement.\u003c\/p\u003e\n\u003cp\u003eThe LIN insulation anchor 10 × 160 mm with a short expansion zone and glass fiber reinforced polyamide nail is designed for easy and quick mechanical installation of insulation materials, especially when the substrate material is not very dense or when it is necessary to reduce the drilling depth. This anchor provides high stability while maintaining a straightforward installation process.\u003c\/p\u003e\n\u003cp\u003e\n\u003cb\u003eAdvantages:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShort expansion zone – reduces the required drilling depth, allowing installation in thinner structures\u003c\/li\u003e\n\u003cli\u003eGlass fiber reinforced polyamide nail – lightweight yet resistant to pull-out and breakage\u003c\/li\u003e\n\u003cli\u003e60 mm pressure plate – uniform load distribution on the insulation material\u003c\/li\u003e\n\u003cli\u003eNon-metallic construction – prevents thermal bridges, ideally suited for ETICS systems\u003c\/li\u003e\n\u003cli\u003eETA certification – complies with European technical requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cb\u003e Technical Information:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDrilling diameter: 10 mm\u003c\/li\u003e\n\u003cli\u003eDrilling depth: ≥ 60 mm\u003c\/li\u003e\n\u003cli\u003eEffective anchoring depth: ≥ 50 mm\u003c\/li\u003e\n\u003cli\u003ePressure plate diameter: 60 mm\u003c\/li\u003e\n\u003cli\u003eAnchor material: polypropylene (PP)\u003c\/li\u003e\n\u003cli\u003eNail material: glass fiber reinforced polyamide\u003c\/li\u003e\n\u003cli\u003eCertification: ETA (European Technical Assessment)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"5\" cellspacing=\"0\"\u003e \u003ctr\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-1.png\" alt=\"1. step\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-2.png\" alt=\"2. step\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-3.png\" alt=\"3. step\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-4.png\" alt=\"4. step\" width=\"150\"\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e1) Drill a hole in the wall \u003c\/td\u003e \u003ctd\u003e2) Insert the anchor into the hole\u003c\/td\u003e \u003ctd\u003e3) Secure the anchor by inserting the dowel\u003c\/td\u003e \u003ctd\u003e4) Properly installed insulation connector\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme1.png?v=1759230754\"\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum substrate thickness — \u003cb\u003eh\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum connector distance — \u003cb\u003eSmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum distance between anchor and substrate - \u003cb\u003eCmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme-2.png?v=1759230755\"\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003ctable border=\"0\" cellpadding=\"10\" cellspacing=\"0\" style=\"text-align: center;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-1.png\" alt=\"1. step\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-2.png\" alt=\"2. step\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-3.png\" alt=\"3. step\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-4.png\" alt=\"4. step\" width=\"150\"\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e1) Drill a hole in the wall \u003c\/td\u003e \u003ctd\u003e2) Insert the anchor into the hole\u003c\/td\u003e \u003ctd\u003e3) Secure the anchor by inserting the dowel\u003c\/td\u003e \u003ctd\u003e4) Properly installed insulation connector\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\u003c\/table\u003e\n\u003ctable class=\"table table-bordered\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e\u003cimg id=\"el-image-1\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme1.png?v=1759230754\"\u003e\u003cbr\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ctable class=\"table table-bordered\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum substrate thickness — \u003cb\u003eh\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum connector distance — \u003cb\u003eSmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum distance between anchor and substrate - \u003cb\u003eCmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cimg id=\"el-image-111\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme-2.png?v=1759230755\"\u003e\u003cbr\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003ctable border=\"0\" cellpadding=\"10\" cellspacing=\"0\" style=\"text-align: center;\"\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSuitable for:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSecuring mineral wool, foam, and other insulation materials\u003c\/li\u003e\n\u003cli\u003eETICS (External Thermal Insulation Composite Systems)\u003c\/li\u003e\n\u003cli\u003eConstruction work with limited drilling depth\u003c\/li\u003e\n\u003cli\u003eNew construction and renovation projects\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4PRO","offers":[{"title":"Default Title","offer_id":56272532898137,"sku":"LIN10160","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/siltumizolacijas-dibelis-ar-plastmasas-naglu.png?v=1773153381"},{"product_id":"insulation-anchor-with-plastic-nail-10x180mm-60mm-plate-short-expansion-zone","title":"Insulation Anchor with Plastic Nail 10x180mm (60mm Plate, Short Expansion Zone)","description":"\u003cp\u003eQuick installation and reliable fixation – ideally suited for effective thermal insulation reinforcement.\u003c\/p\u003e\n\u003cp\u003eLIN insulation anchor 10 × 180 mm with a short expansion zone and glass fiber reinforced polyamide nail is designed for simple and rapid mechanical installation of insulation materials, especially when the substrate material is not very dense or when it is necessary to reduce the drilling depth. This anchor provides high stability while maintaining a straightforward installation process.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAdvantages:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShort expansion zone – reduces the required drilling depth, allowing installation in thinner structures\u003c\/li\u003e\n\u003cli\u003eGlass fiber reinforced polyamide nail – lightweight yet durable against pull-out and breakage\u003c\/li\u003e\n\u003cli\u003e60 mm pressure plate – uniform load distribution on the insulation material\u003c\/li\u003e\n\u003cli\u003eNon-metallic construction – prevents thermal bridges, ideally suited for ETICS systems\u003c\/li\u003e\n\u003cli\u003eETA certification – complies with European technical requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eTechnical Information:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDrill diameter: 10 mm\u003c\/li\u003e\n\u003cli\u003eDrill depth: ≥ 60 mm\u003c\/li\u003e\n\u003cli\u003eEffective anchoring depth: ≥ 50 mm\u003c\/li\u003e\n\u003cli\u003ePressure plate diameter: 60 mm\u003c\/li\u003e\n\u003cli\u003eAnchor material: polypropylene (PP)\u003c\/li\u003e\n\u003cli\u003eNail material: glass fiber reinforced polyamide\u003c\/li\u003e\n\u003cli\u003eCertification: ETA (European Technical Assessment)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"5\" cellspacing=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-1.png\" alt=\"1. step\" width=\"150\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-2.png\" alt=\"2. step\" width=\"150\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-3.png\" alt=\"3. step\" width=\"150\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-4.png\" alt=\"4. step\" width=\"150\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1) Drill a hole in the wall \u003c\/td\u003e\n\u003ctd\u003e2) Insert the anchor into the hole\u003c\/td\u003e\n\u003ctd\u003e3) Secure the anchor by inserting the plugs\u003c\/td\u003e\n\u003ctd\u003e4) Properly installed insulation connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme1.png?v=1759230754\"\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum substrate thickness — \u003cb\u003eh\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum distance between connectors — \u003cb\u003eSmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum distance between anchor and substrate - \u003cb\u003eCmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme-2.png?v=1759230755\"\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable border=\"0\" cellpadding=\"10\" cellspacing=\"0\" style=\"text-align: center;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-1.png\" alt=\"1. step\" width=\"150\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-2.png\" alt=\"2. step\" width=\"150\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-3.png\" alt=\"3. step\" width=\"150\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-4.png\" alt=\"4. step\" width=\"150\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1) Drill a hole in the wall \u003c\/td\u003e\n\u003ctd\u003e2) Insert the anchor into the hole\u003c\/td\u003e\n\u003ctd\u003e3) Secure the anchor by inserting the plugs\u003c\/td\u003e\n\u003ctd\u003e4) Properly installed insulation connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cimg id=\"el-image-1\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme1.png?v=1759230754\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum substrate thickness — \u003cb\u003eh\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum distance between connectors — \u003cb\u003eSmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum distance between anchor and substrate - \u003cb\u003eCmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cimg id=\"el-image-111\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme-2.png?v=1759230755\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable border=\"0\" cellpadding=\"10\" cellspacing=\"0\" style=\"text-align: center;\"\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSuitable for:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSecuring mineral wool, foam, and other insulation materials\u003c\/li\u003e\n\u003cli\u003eETICS (External Thermal Insulation Composite Systems)\u003c\/li\u003e\n\u003cli\u003eConstruction work with limited drilling depth\u003c\/li\u003e\n\u003cli\u003eNew builds and renovation projects\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4PRO","offers":[{"title":"Default Title","offer_id":56272538763609,"sku":"LIN10180","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/siltumizolacijas-dibelis-ar-plastmasas-naglu.png?v=1773153381"},{"product_id":"insulation-anchor-with-plastic-nail-10x200mm-60mm-plate-short-expansion-zone","title":"Insulation Anchor with Plastic Nail 10x200mm (60mm Plate, Short Expansion Zone)","description":"\u003cp\u003eQuick installation and reliable fixation – ideally suited for effective thermal insulation reinforcement.\u003c\/p\u003e\n\u003cp\u003eLIN insulation anchor 10 × 180 mm with a short expansion zone and fiberglass reinforced polyamide nail is designed for simple and quick mechanical installation of insulation materials, especially when the substrate material is not very dense or when it is necessary to reduce the drilling depth. This anchor provides high durability while maintaining a straightforward installation process.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAdvantages:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShort expansion zone – reduces the required drilling depth, allowing installation in thinner structures\u003c\/li\u003e\n\u003cli\u003eFiberglass reinforced polyamide nail – lightweight yet resistant to pull-out and breakage\u003c\/li\u003e\n\u003cli\u003e60 mm pressure plate – uniform load distribution on the insulation material\u003c\/li\u003e\n\u003cli\u003eNon-metallic construction – prevents thermal bridges, ideally suited for ETICS systems\u003c\/li\u003e\n\u003cli\u003eETA certification – complies with European technical requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eTechnical Information:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDrill diameter: 10 mm\u003c\/li\u003e\n\u003cli\u003eDrill depth: ≥ 60 mm\u003c\/li\u003e\n\u003cli\u003eEffective anchoring depth: ≥ 50 mm\u003c\/li\u003e\n\u003cli\u003ePressure plate diameter: 60 mm\u003c\/li\u003e\n\u003cli\u003eAnchor material: polypropylene (PP)\u003c\/li\u003e\n\u003cli\u003eNail material: fiberglass reinforced polyamide\u003c\/li\u003e\n\u003cli\u003eCertification: ETA (European Technical Assessment)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"5\" cellspacing=\"0\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align: center;\"\u003eACCEPTED SUBSTRATE\u003c\/th\u003e\n\u003cth style=\"text-align: center;\"\u003eDENSITY [kg\/dm³]\u003c\/th\u003e\n\u003cth style=\"text-align: center;\"\u003eMINIMUM PRESSURE [N\/mm²]\u003c\/th\u003e\n\u003cth style=\"text-align: center;\"\u003eAPPLICABLE STANDARD\u003c\/th\u003e\n\u003cth style=\"text-align: center;\"\u003eCharacteristic Resistance NRk [kN]\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eConcrete C12\/15 (application category A)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eEN 206\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0.55\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConcrete C16\/20 to C50\/60 (application category A)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eEN 206\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0.80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCeramic solid bricks MZ (application category B)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e≥2.0\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e≥20.0\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eEN 771-1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCalcium silicate bricks KS (application category B)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e≥2.0\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e≥20.0\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eEN 771-2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0.40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertically perforated ceramic bricks Porotherm 25 P+D (category C)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e≥0.8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e≥15.0\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eEN 771-1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0.10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHollow calcium silicate blocks KSL (application category C)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e≥1.6\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e≥15.0\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eEN 771-2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0.10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLightweight concrete blocks LAC (application category D)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e≥0.88\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e≥5.0\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eEN 771-3\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0.20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePartial safety factor for anchor resistance ɣM (1)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2.0\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2.0\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2.0\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInstallation:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable border=\"0\" cellpadding=\"10\" cellspacing=\"0\" style=\"text-align: center;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-1.png\" alt=\"1. step\" width=\"150\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-2.png\" alt=\"2. step\" width=\"150\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-3.png\" alt=\"3. step\" width=\"150\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/lipn-4.png\" alt=\"4. step\" width=\"150\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1) Drill the wall\u003c\/td\u003e\n\u003ctd\u003e2) Insert the anchor into the hole\u003c\/td\u003e\n\u003ctd\u003e3) Secure the anchor by inserting the plugs\u003c\/td\u003e\n\u003ctd\u003e4) Properly installed insulation connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cimg id=\"el-image-1\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme1.png?v=1759230754\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum substrate thickness — \u003cb\u003eh\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum connector distance — \u003cb\u003eSmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum distance between anchor and substrate - \u003cb\u003eCmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cimg id=\"el-image-111\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme-2.png?v=1759230755\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable border=\"0\" cellpadding=\"10\" cellspacing=\"0\" style=\"text-align: center;\"\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSuitable for:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSecuring mineral wool, foam, and other insulation materials\u003c\/li\u003e\n\u003cli\u003eETICS (external thermal insulation composite systems)\u003c\/li\u003e\n\u003cli\u003eConstruction work with limited drilling depth\u003c\/li\u003e\n\u003cli\u003eNew construction and renovation projects\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4PRO","offers":[{"title":"Default Title","offer_id":56272543809881,"sku":"LIN10200","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/siltumizolacijas-dibelis-ar-plastmasas-naglu.png?v=1773153381"},{"product_id":"insulation-anchor-with-metal-nail-10x160mm-60mm-plate-short-expansion-zone","title":"Insulation Anchor with Metal Nail 10x160mm (60mm Plate, Short Expansion Zone)","description":"\u003cp\u003eExceptional mechanical strength and reliable insulation anchoring even in challenging conditions.\u003c\/p\u003e\n\u003cp\u003eThe LIMO insulation anchor 10 × 160 mm features high-performance mechanical fastening with a galvanized carbon steel nail and a polyamide coating, combining the strength of metal with thermal insulating properties. Thanks to the short expansion zone, this anchor is particularly suitable for quick and efficient installation on various substrates, maintaining high pull-out resistance.\u003c\/p\u003e\n\u003cp\u003e\n\u003cb\u003eAdvantages:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMetal nail with polyamide head – high strength and minimal thermal bridge\u003c\/li\u003e\n\u003cli\u003eShort expansion zone – reduces required drilling depth\u003c\/li\u003e\n\u003cli\u003e60 mm pressure plate – uniform compression of insulation material\u003c\/li\u003e\n\u003cli\u003eHigh resistance to pull-out and mechanical forces\u003c\/li\u003e\n\u003cli\u003eETA certified product – tested in accordance with EU construction standards\u003c\/li\u003e\n\u003cli\u003eSuitable for mineral wool, expanded polystyrene, PIR, and other insulation materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cb\u003e Technical Information:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDrill diameter: 10 mm\u003c\/li\u003e\n\u003cli\u003eDrill depth: ≥ 60 mm\u003c\/li\u003e\n\u003cli\u003eEffective anchoring depth: ≥ 50 mm\u003c\/li\u003e\n\u003cli\u003eAnchor length: 160 mm\u003c\/li\u003e\n\u003cli\u003ePressure plate diameter: 60 mm\u003c\/li\u003e\n\u003cli\u003eConnector material: polypropylene (PP)\u003c\/li\u003e\n\u003cli\u003eNail material: galvanized carbon steel with polyamide coating\u003c\/li\u003e\n\u003cli\u003eCertification: European Technical Assessment (ETA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"5\" cellspacing=\"0\"\u003e \u003ctr\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/limo-1.png\" alt=\"1st step\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/limo-2.png\" alt=\"2nd step\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/limo-3.png\" alt=\"3rd step\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/limo-4.png\" alt=\"4th step\" width=\"150\"\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e1) Drill a hole in the wall \u003c\/td\u003e \u003ctd\u003e2) Insert the anchor into the hole\u003c\/td\u003e \u003ctd\u003e3) Secure the anchor by driving in the nail\u003c\/td\u003e \u003ctd\u003e4) Correctly installed insulation connector\u003c\/td\u003e \u003c\/tr\u003e \n\u003ctbody\u003e\n\u003c\/tbody\u003e\n\u003ctbody\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme1.png?v=1759230754\"\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum substrate thickness — \u003cb\u003eh\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum connector distance — \u003cb\u003eSmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum distance between anchor and substrate - \u003cb\u003eCmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme-2.png?v=1759230755\"\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003ctable border=\"0\" cellpadding=\"10\" cellspacing=\"0\" style=\"text-align: center;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/limo-1.png\" alt=\"1st step\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/limo-2.png\" alt=\"2nd step\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/limo-3.png\" alt=\"3rd step\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/limo-4.png\" alt=\"4th step\" width=\"150\"\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e1) Drill a hole in the wall \u003c\/td\u003e \u003ctd\u003e2) Insert the anchor into the hole\u003c\/td\u003e \u003ctd\u003e3) Secure the anchor by driving in the nail\u003c\/td\u003e \u003ctd\u003e4) Correctly installed insulation connector\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ctable class=\"table table-bordered\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e\u003cimg id=\"el-image-1\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme1.png?v=1759230754\"\u003e\u003cbr\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ctable class=\"table table-bordered\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum substrate thickness — \u003cb\u003eh\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum connector distance — \u003cb\u003eSmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum distance between anchor and substrate - \u003cb\u003eCmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cimg id=\"el-image-111\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme-2.png?v=1759230755\"\u003e\u003cbr\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"0\" cellpadding=\"10\" cellspacing=\"0\" style=\"text-align: center;\"\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSuitable for:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExternal Thermal Insulation Composite Systems (ETICS)\u003c\/li\u003e\n\u003cli\u003eSecuring mineral wool and other insulation materials\u003c\/li\u003e\n\u003cli\u003eApplicable in concrete, bricks, aerated concrete, and other base materials\u003c\/li\u003e\n\u003cli\u003eFor both new constructions and renovation works\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4PRO","offers":[{"title":"Default Title","offer_id":56272547479897,"sku":"LIMO\/110160","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/siltumizolacijas-dibelis-ar-terauda-naglu.png?v=1773213122"},{"product_id":"insulation-anchor-with-metal-nail-10x220mm-60mm-plate-short-expansion-zone","title":"Insulation Anchor with Metal Nail 10x220mm (60mm Plate, Short Expansion Zone)","description":"\u003cp\u003eFacade insulationExceptional mechanical strength and reliable insulation anchoring even in challenging conditions.\u003c\/p\u003e\n\u003cp\u003eThe LIMO insulation anchor 10 × 220 mm features high-performance mechanical fastening with a galvanized carbon steel nail and a polyamide coating, combining the strength of metal with thermal insulation properties. Thanks to the short expansion zone, this anchor is particularly suitable for quick and efficient installation on various substrates, maintaining high pull-out resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAdvantages:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMetal nail with polyamide head – high strength and minimal thermal bridge\u003c\/li\u003e\n\u003cli\u003eShort expansion zone – reduces required drilling depth\u003c\/li\u003e\n\u003cli\u003e60 mm pressure plate – uniform compression of insulation material\u003c\/li\u003e\n\u003cli\u003eHigh resistance to pull-out and mechanical forces\u003c\/li\u003e\n\u003cli\u003eETA certified product – tested in accordance with EU construction standards\u003c\/li\u003e\n\u003cli\u003eSuitable for mineral wool, expanded polystyrene, PIR, and other insulation materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eTechnical Information:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDrill diameter: 10 mm\u003c\/li\u003e\n\u003cli\u003eDrill depth: ≥ 60 mm\u003c\/li\u003e\n\u003cli\u003eEffective anchoring depth: ≥ 50 mm\u003c\/li\u003e\n\u003cli\u003eAnchor length: 160 mm\u003c\/li\u003e\n\u003cli\u003ePressure plate diameter: 60 mm\u003c\/li\u003e\n\u003cli\u003eConnector material: polypropylene (PP)\u003c\/li\u003e\n\u003cli\u003eNail material: galvanized carbon steel with polyamide coating\u003c\/li\u003e\n\u003cli\u003eCertification: European Technical Assessment (ETA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable cellspacing=\"0\" cellpadding=\"5\" border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cimg width=\"150\" alt=\"Step 2\" src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/limo-2.png\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg width=\"150\" alt=\"Step 3\" src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/limo-3.png\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg width=\"150\" alt=\"Step 4\" src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/limo-4.png\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1) Drill a hole in the wall \u003c\/td\u003e\n\u003ctd\u003e2) Insert the anchor into the hole\u003c\/td\u003e\n\u003ctd\u003e3) Secure the anchor by driving in the nail\u003c\/td\u003e\n\u003ctd\u003e4) Properly installed insulation connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme1.png?v=1759230754\"\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum substrate thickness — \u003cb\u003eh\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum connector spacing — \u003cb\u003eSmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum distance between anchor and substrate - \u003cb\u003eCmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme-2.png?v=1759230755\"\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable style=\"text-align: center;\" cellspacing=\"0\" cellpadding=\"10\" border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cimg width=\"150\" alt=\"Step 1\" src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/limo-1.png\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg width=\"150\" alt=\"Step 2\" src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/limo-2.png\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg width=\"150\" alt=\"Step 3\" src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/limo-3.png\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg width=\"150\" alt=\"Step 4\" src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/limo-4.png\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1) Drill a hole in the wall \u003c\/td\u003e\n\u003ctd\u003e2) Insert the anchor into the hole\u003c\/td\u003e\n\u003ctd\u003e3) Secure the anchor by driving in the nail\u003c\/td\u003e\n\u003ctd\u003e4) Properly installed insulation connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme1.png?v=1759230754\" id=\"el-image-1\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum substrate thickness — \u003cb\u003eh\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum connector spacing — \u003cb\u003eSmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum distance between anchor and substrate - \u003cb\u003eCmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme-2.png?v=1759230755\" id=\"el-image-111\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable style=\"text-align: center;\" cellspacing=\"0\" cellpadding=\"10\" border=\"0\"\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSuitable for:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExternal thermal insulation composite systems (ETICS)\u003c\/li\u003e\n\u003cli\u003eSecuring mineral wool and other insulation materials\u003c\/li\u003e\n\u003cli\u003eApplicable in concrete, brick, aerated concrete, and other base materials\u003c\/li\u003e\n\u003cli\u003eFor both new constructions and renovation works\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4PRO","offers":[{"title":"Default Title","offer_id":56272555639129,"sku":"LIMO\/110220","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/siltumizolacijas-dibelis-ar-terauda-naglu.png?v=1773213122"},{"product_id":"insulation-anchor-with-metal-nail-10x260mm-60mm-plate-short-expansion-zone","title":"Insulation Anchor with Metal Nail 10x260mm (60mm Plate, Short Expansion Zone)","description":"\u003cp\u003eExceptional mechanical strength and reliable insulation anchoring even in challenging conditions.\u003c\/p\u003e\n\u003cp\u003eThe LIMO insulation anchor 10 × 260 mm features high-performance mechanical fastening with a galvanized carbon steel nail and a polyamide coating, combining the strength of metal with thermal insulating properties. Thanks to the short expansion zone, this anchor is particularly suitable for quick and efficient installation on various substrates, maintaining high pull-out resistance.\u003c\/p\u003e\n\u003cp\u003e\n\u003cb\u003eAdvantages:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMetal nail with polyamide head – high strength and minimal thermal bridge\u003c\/li\u003e\n\u003cli\u003eShort expansion zone – reduces required drilling depth\u003c\/li\u003e\n\u003cli\u003e60 mm pressure plate – uniform compression of insulation material\u003c\/li\u003e\n\u003cli\u003eHigh resistance to pull-out and mechanical forces\u003c\/li\u003e\n\u003cli\u003eETA certified product – verified compliance with EU construction standards\u003c\/li\u003e\n\u003cli\u003eSuitable for mineral wool, expanded polystyrene, PIR, and other insulation materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cb\u003e Technical Information:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDrill diameter: 10 mm\u003c\/li\u003e\n\u003cli\u003eDrilling depth: ≥ 60 mm\u003c\/li\u003e\n\u003cli\u003eEffective anchoring depth: ≥ 50 mm\u003c\/li\u003e\n\u003cli\u003eAnchor length: 160 mm\u003c\/li\u003e\n\u003cli\u003ePressure plate diameter: 60 mm\u003c\/li\u003e\n\u003cli\u003eConnector material: polypropylene (PP)\u003c\/li\u003e\n\u003cli\u003eNail material: galvanized carbon steel with polyamide coating\u003c\/li\u003e\n\u003cli\u003eCertification: European Technical Assessment (ETA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"5\" cellspacing=\"0\"\u003e \u003ctr\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/limo-1.png\" alt=\"1. step\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/limo-2.png\" alt=\"2. step\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/limo-3.png\" alt=\"3. step\" width=\"150\"\u003e \u003c\/td\u003e \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/06\/limo-4.png\" alt=\"4. step\" width=\"150\"\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e1) Drill a hole in the wall \u003c\/td\u003e \u003ctd\u003e2) Insert the anchor into the hole\u003c\/td\u003e \u003ctd\u003e3) Secure the anchor by driving in the nail\u003c\/td\u003e \u003ctd\u003e4) Properly installed insulation connector\u003c\/td\u003e \u003c\/tr\u003e \n\u003ctbody\u003e\n\u003c\/tbody\u003e\n\u003ctbody\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme1.png?v=1759230754\"\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum substrate thickness — \u003cb\u003eh\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum connector distance — \u003cb\u003eSmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum distance between anchor and substrate - \u003cb\u003eCmin\u003c\/b\u003e [mm]\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-scheme-2.png?v=1759230755\"\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003ctable border=\"0\" cellpadding=\"10\" cellspacing=\"0\" style=\"text-align: center;\"\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e \n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSuitable for:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExternal thermal insulation composite systems (ETICS)\u003c\/li\u003e\n\u003cli\u003eSecuring mineral wool and other insulation materials\u003c\/li\u003e\n\u003cli\u003eApplicable in concrete, bricks, aerated concrete, and other base materials\u003c\/li\u003e\n\u003cli\u003eFor both new constructions and renovation works\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4PRO","offers":[{"title":"Default Title","offer_id":56272560292185,"sku":"LIMO\/110260","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/siltumizolacijas-dibelis-ar-terauda-naglu.png?v=1773213122"},{"product_id":"insulation-fastener-for-wood-or-metal-with-cap-o-60mm","title":"Insulation Fastener for Wood or Metal with Cap (Ø 60mm)","description":"\u003cp\u003eQuick and effective insulation fastening without thermal bridges – ideally suited for wood and steel surfaces.\u003c\/p\u003e\n\u003cp\u003eLIK insulation material fastener with cap is designed for the mechanical installation of thermal insulation on wooden surfaces (for example, OSB boards) or steel sheets (min. 0.75 mm) with a suitable screw (not included in the package). The cap helps reduce heat loss by covering the screw and preventing the formation of thermal bridges.\u003c\/p\u003e\n\u003cp\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003cp\u003eThe flange is compatible with the additional KWL pressure plate when using mineral wool – it improves pressure distribution and material stability.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAdvantages:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInsulation fastening on wood or metal substrates\u003c\/li\u003e\n\u003cli\u003eCompatible with wood screws and self-tapping screws for metal\u003c\/li\u003e\n\u003cli\u003eIncluded cap – prevents the formation of thermal bridges\u003c\/li\u003e\n\u003cli\u003eQuick and easy installation – ideal for professionals and DIY users\u003c\/li\u003e\n\u003cli\u003eAdditional compatibility with KWL plate when using mineral wool insulation\u003c\/li\u003e\n\u003cli\u003eScrew not included – allows for adaptation to the project\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eTechnical Information:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProduct: pressure flange with cap\u003c\/li\u003e\n\u003cli\u003eDiameter: 60 mm\u003c\/li\u003e\n\u003cli\u003eMinimum anchoring depth on wooden surfaces: 20 mm\u003c\/li\u003e\n\u003cli\u003ePermissible screw diameter: 4.8 - 6.0 mm\u003c\/li\u003e\n\u003cli\u003eSubstrates: wood (OSB), metal sheets ≥ 0.75 mm\u003c\/li\u003e\n\u003cli\u003eScrew type: wood screw or self-tapping metal screw (not included)\u003c\/li\u003e\n\u003cli\u003eCompatible with: additional KWL plate (for lamella wool)\u003c\/li\u003e\n\u003cli\u003eFunction: fastening of insulation material without thermal bridges\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eApplication:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInsulation of facades and ceilings\u003c\/li\u003e\n\u003cli\u003eFastening of mineral wool, EPS, PIR, etc. insulation boards on wood or metal\u003c\/li\u003e\n\u003cli\u003eETICS and similar thermal insulation systems\u003c\/li\u003e\n\u003cli\u003eSuitable for both new construction and renovation projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable border=\"0\" cell alt=\"Image 1\" width=\"450\"\u003e  \u003ctd\u003e \u003cimg src=\"https:\/\/mk-plugs.com\/wp-content\/uploads\/2023\/08\/lik-2.png\" alt=\"Image 2\" width=\"450\"\u003e \u003c\/td\u003e  \n\u003c\/table\u003e \u003cp\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n\u003cbr\u003e\n\u003c\/p\u003e","brand":"4PRO","offers":[{"title":"Default Title","offer_id":56272565043545,"sku":"LIK60","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lik-izolacijas-stiprinajums-koka-skruvem.png?v=1759308183"},{"product_id":"white-eps-plugs-for-thermal-insulation-fasteners-o67-mm","title":"White EPS Plugs for Thermal Insulation Fasteners (Ø67 mm)","description":"\u003cp\u003eAesthetic and functional solution for reducing thermal bridges and protecting facades.\u003c\/p\u003e\n\u003cp\u003eWhite EPS plugs are designed for use in thermal insulation systems (ETICS), where mechanical fasteners or insulation anchors are employed. The plugs are inserted at the location of the fastener heads, providing additional thermal insulation, preventing thermal bridges, and enhancing the visual appearance of the facade.\u003c\/p\u003e\n\u003cp\u003eThey are particularly useful in situations where thermal breaks are required between the heads of plastic or metal anchors and the outer render layer.\u003c\/p\u003e\n\u003cp\u003e\n\u003cb\u003eAdvantages:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReduces thermal bridges – improves overall thermal insulation efficiency\u003c\/li\u003e\n\u003cli\u003eWhite color – suitable for light-colored renders or their surface finishes\u003c\/li\u003e\n\u003cli\u003eProtects the fastener location – prevents condensation and moisture ingress\u003c\/li\u003e\n\u003cli\u003eSimple installation – inserted into the anchor head after installation\u003c\/li\u003e\n\u003cli\u003eCompatible with the most popular ETICS fasteners\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cb\u003eTechnical Information:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: white EPS (expanded polystyrene)\u003c\/li\u003e\n\u003cli\u003eApplication: sealing ETICS fastener locations\u003c\/li\u003e\n\u003cli\u003eInstallation: mechanical insertion into the fastener head\u003c\/li\u003e\n\u003cli\u003eCompatibility: with plastic and metal anchors (standard head diameter)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cb\u003eApplication:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIn external thermal insulation systems for facades\u003c\/li\u003e\n\u003cli\u003eTo reduce thermal bridges around anchor heads\u003c\/li\u003e\n\u003cli\u003eIn new construction and renovation projects\u003c\/li\u003e\n\u003cli\u003eIn projects for securing mineral wool and EPS boards\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4PRO","offers":[{"title":"Default Title","offer_id":56272571138393,"sku":"STYR02","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/styr03-putuplasta-aizbaznis.png?v=1759308189"},{"product_id":"mineral-wool-plugs-for-insulation-fasteners-o67-mm","title":"Mineral Wool Plugs for Insulation Fasteners (Ø67 mm)","description":"\u003cp\u003eEffective protection against thermal bridges and high vapor permeability – ideal for mineral wool systems.\u003c\/p\u003e\n\u003cp\u003eMineral wool plugs Ø67 mm are designed for insulation systems (ETICS), where mechanical fasteners with plastic or metal anchors are used. The plugs are installed above the anchor heads, providing additional thermal insulation, reducing heat loss, and improving the quality of the finish.\u003c\/p\u003e\n\u003cp\u003eMineral wool plugs are characterized by high vapor permeability, making them particularly suitable for breathable façade systems, where optimal moisture balance must be maintained within the wall structure.\u003c\/p\u003e\n\u003cp\u003e\n\u003cb\u003eAdvantages:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExcellent solution for air bridges – prevents thermal bridges at anchor locations\u003c\/li\u003e\n\u003cli\u003eMade from mineral wool – compatible with the insulation materials themselves\u003c\/li\u003e\n\u003cli\u003eØ67 mm diameter – completely covers the anchor head and pressure plate\u003c\/li\u003e\n\u003cli\u003eHigh vapor permeability – the façade “breathes”, preventing condensation\u003c\/li\u003e\n\u003cli\u003eImproves façade uniformity – prepares the surface for a consistent finish\u003c\/li\u003e\n\u003cli\u003eCompatible with various ETICS anchors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cb\u003eTechnical Information:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: compressed mineral wool\u003c\/li\u003e\n\u003cli\u003eDiameter: Ø67 mm\u003c\/li\u003e\n\u003cli\u003eFunction: prevention of thermal bridges, covering of anchor locations\u003c\/li\u003e\n\u003cli\u003eInstallation: mechanical insertion after anchor installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cb\u003eApplication:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInsulation of external façades with mineral wool\u003c\/li\u003e\n\u003cli\u003eETICS systems (breathable insulation systems)\u003c\/li\u003e\n\u003cli\u003eCovering of anchor heads and improvement of thermal insulation\u003c\/li\u003e\n\u003cli\u003eNew constructions and renovations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4PRO","offers":[{"title":"Default Title","offer_id":56272579264857,"sku":"STYR05","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/styr05-mineralvates-aizbaznis.png?v=1759308196"},{"product_id":"gray-eps-plugs-for-thermal-insulation-fasteners-o67-mm","title":"Gray EPS Plugs for Thermal Insulation Fasteners (Ø67 mm)","description":"\u003cp\u003eAesthetic and functional solution for reducing thermal bridges and protecting facades.\u003c\/p\u003e\n\u003cp\u003eEPS plugs (gray) are designed for use in thermal insulation systems (ETICS), where mechanical fasteners or insulation anchors are employed. The plugs are inserted into the fastener heads, providing additional thermal insulation, preventing thermal bridges, and enhancing the visual appearance of the facade.\u003c\/p\u003e\n\u003cp\u003eThey are particularly useful in situations where thermal interruption is required between the plastic or metal anchor head and the outer plaster layer.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAdvantages:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReduces thermal bridges – improves overall thermal insulation efficiency\u003c\/li\u003e\n\u003cli\u003eGray color – suitable for light-colored plasters or their surface finishes\u003c\/li\u003e\n\u003cli\u003eProtects the fastener area – prevents condensation and moisture ingress\u003c\/li\u003e\n\u003cli\u003eEasy installation – inserted into the anchor head after installation\u003c\/li\u003e\n\u003cli\u003eCompatible with the most popular ETICS fasteners\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eTechnical Information:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: white EPS (expanded polystyrene)\u003c\/li\u003e\n\u003cli\u003eApplication: sealing ETICS fastener locations\u003c\/li\u003e\n\u003cli\u003eInstallation: mechanical insertion into the fastener head\u003c\/li\u003e\n\u003cli\u003eCompatibility: with plastic and metal anchors (standard head diameter)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eApplication:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExternal thermal insulation systems for facades\u003c\/li\u003e\n\u003cli\u003eReducing thermal bridges around anchor heads\u003c\/li\u003e\n\u003cli\u003eNew construction and renovation projects\u003c\/li\u003e\n\u003cli\u003eProjects for securing mineral wool and EPS boards\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4PRO","offers":[{"title":"Default Title","offer_id":56272586080601,"sku":"STYR03","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/styr02-putuplasta-aizbaznis.png?v=1759308203"},{"product_id":"polyfoam-hole-cutter-o67-mm-for-insulation-plug-insertion","title":"Polyfoam Hole Cutter Ø67 mm – for Insulation Plug Insertion","description":"\u003cp\u003ePrecise and clean hole for plug insertion – an ideal tool for professional facade insulation.\u003c\/p\u003e\n\u003cp\u003eThe Polyfoam Hole Cutter Ø67 mm is designed to cut a precise opening in insulation materials, such as EPS or mineral wool, for the insertion of plugs that cover the plug heads. The tool's construction allows for quick, clean, and uniform cutting of the necessary opening without disrupting the structure of the thermal insulation layer.\u003c\/p\u003e\n\u003cp\u003e\n\u003cb\u003eAdvantages:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eØ67 mm diameter – perfectly matches standard insulation plug sizes\u003c\/li\u003e\n\u003cli\u003eClean and precise cut – preserves the structure of the insulation boards\u003c\/li\u003e\n\u003cli\u003eReduces installation time – particularly effective for large-scale projects\u003c\/li\u003e\n\u003cli\u003eSuitable for EPS, XPS, PIR, and mineral wool boards\u003c\/li\u003e\n\u003cli\u003eHelps prepare the area for plug insertion, reducing thermal bridges\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cb\u003eTechnical Information:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDiameter: Ø67 mm\u003c\/li\u003e\n\u003cli\u003eApplication: drilling openings in insulation materials for plug insertion\u003c\/li\u003e\n\u003cli\u003eCompatibility: EPS, rigid foam, PIR, etc.\u003c\/li\u003e\n\u003cli\u003eUsage: with a drill\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cb\u003eApplication:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePreparation for facade insulation work\u003c\/li\u003e\n\u003cli\u003eInstallation of ETICS systems using plug inserts\u003c\/li\u003e\n\u003cli\u003eCreating precise openings in polyfoam boards\u003c\/li\u003e\n\u003cli\u003eFor professional and home use in renovations or new constructions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4PRO","offers":[{"title":"Default Title","offer_id":56272590012761,"sku":"STYR01","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/styr-01-67-mm-plastic.png?v=1759308211"},{"product_id":"mineral-wool-hole-cutter-o65-mm-for-insulation-plug-installation","title":"Mineral Wool Hole Cutter Ø65 mm – For Insulation Plug Installation","description":"\u003cp\u003ePrecise and clean hole for plug insertion – an ideal tool for professional facade insulation.\u003c\/p\u003e\n\u003cp\u003eThe Mineral Wool Hole Cutter Ø65 mm is designed to cut precise openings in insulation materials, such as expanded polystyrene or mineral wool, for the insertion of plugs that cover the plug heads. The tool's design allows for quick, clean, and uniform cutting of the required opening without disrupting the structure of the insulation layer.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAdvantages:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eØ65 mm diameter – perfectly matches standard insulation plug sizes\u003c\/li\u003e\n\u003cli\u003eClean and precise cut – preserves the structure of insulation boards\u003c\/li\u003e\n\u003cli\u003eReduces installation time – especially effective for large-scale projects\u003c\/li\u003e\n\u003cli\u003eSuitable for EPS, XPS, PIR, and mineral wool boards\u003c\/li\u003e\n\u003cli\u003eHelps prepare the area for plug insertion, reducing thermal bridges\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eTechnical Information:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDiameter: Ø65 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Drilling insulation materials for plug insertion\u003c\/li\u003e\n\u003cli\u003eCompatibility: EPS, rigid foam, PIR, etc.\u003c\/li\u003e\n\u003cli\u003eUsage: With a drill\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eApplications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePreparation for facade insulation work\u003c\/li\u003e\n\u003cli\u003eInstallation of ETICS systems using plug inserts\u003c\/li\u003e\n\u003cli\u003eCreating precise openings in foam boards\u003c\/li\u003e\n\u003cli\u003eFor professional and home use in renovations or new constructions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4PRO","offers":[{"title":"Default Title","offer_id":56272598532441,"sku":"STYR011","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/styr-001-65-mm-metal.png?v=1759308217"},{"product_id":"pfi-spiral-anchor-for-lightweight-element-fixation-in-thermal-insulation","title":"PFI Spiral Anchor for Lightweight Element Fixation in Thermal Insulation","description":"\u003cp\u003eQuick, simple, and secure fastening without drilling – ideal for insulated facades.\u003c\/p\u003e\n\u003cp\u003eThe PFI spiral anchor is designed for securing lightweight objects (such as lamps, cables, decorations, etc.) directly into thermal insulation materials, such as expanded polystyrene (EPS), polyurethane (PUR) boards, or mineral wool facades, without the need to reach the load-bearing wall structure. The specially designed spiral thread effectively penetrates the insulation, providing sufficient stability without compromising the structure of the thermal insulation.\u003c\/p\u003e\n\u003cp\u003e\n\u003cb\u003eAdvantages:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNo drilling required – easily screws directly into the insulation\u003c\/li\u003e\n\u003cli\u003eFast and easy installation – ideal for both DIY and professional use\u003c\/li\u003e\n\u003cli\u003eCompatible with various screws and hooks – flexible application\u003c\/li\u003e\n\u003cli\u003eSpecial spiral thread – high stability in insulation materials\u003c\/li\u003e\n\u003cli\u003eIdeal solution for insulated facades – does not damage the ETICS system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cb\u003eTechnical Information:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eType: Spiral plastic anchor for insulation\u003c\/li\u003e\n\u003cli\u003eMaterial compatibility: Expanded polystyrene (EPS\/XPS), PUR, mineral wool\u003c\/li\u003e\n\u003cli\u003eInstallation: Screwing without prior drilling\u003c\/li\u003e\n\u003cli\u003eCompatibility: With various screws and hooks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-spirlaveida-dibelu-shema.png?v=1759230756\"\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n\u003cbr\u003e\n\u003c\/p\u003e \u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eCODE\u003c\/td\u003e \u003ctd\u003eMATERIAL\u003c\/td\u003e \u003ctd\u003eHEAD\u003c\/td\u003e \u003ctd\u003eDIA.\u003c\/td\u003e \u003ctd\u003eLENGTH\u003c\/td\u003e \u003ctd\u003eINNER DIA.\u003c\/td\u003e \u003ctd\u003eD\u003csub\u003emin\u003c\/sub\u003e\n\u003c\/td\u003e \u003ctd\u003eD\u003csub\u003emax\u003c\/sub\u003e\n\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePFI-50\u003c\/td\u003e \u003ctd\u003ePOLYPROPYLENE\u003c\/td\u003e \u003ctd\u003eT40\u003c\/td\u003e\n\u003ctd\u003e25 mm\u003c\/td\u003e \u003ctd\u003e50 mm\u003c\/td\u003e \u003ctd\u003e⌀ 4.5\/ ⌀ 5.0\u003c\/td\u003e \u003ctd\u003e35+ h\u003csub\u003eef \u003c\/sub\u003e\/ 30+ h\u003csub\u003eef\u003c\/sub\u003e\n\u003c\/td\u003e \u003ctd\u003e45+ h\u003csub\u003eef \u003c\/sub\u003e\/ 45+ h\u003csub\u003eef\u003c\/sub\u003e\n\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePFI-90\u003c\/td\u003e \u003ctd\u003ePOLYPROPYLENE\u003c\/td\u003e \u003ctd\u003eT40\u003c\/td\u003e\n\u003ctd\u003e25 mm\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003ctd\u003e⌀ 4.5\/ ⌀ 5.0\u003c\/td\u003e\n\u003ctd\u003e35+ h\u003csub\u003eef \u003c\/sub\u003e\/ 30+ h\u003csub\u003eef\u003c\/sub\u003e\n\u003c\/td\u003e\n\u003ctd\u003e80+ h\u003csub\u003eef \u003c\/sub\u003e\/ 70+ h\u003csub\u003eef\u003c\/sub\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePFI-50N\u003c\/td\u003e\n\u003ctd\u003ePOLYAMIDE\u003c\/td\u003e\n\u003ctd\u003eT40\u003c\/td\u003e\n\u003ctd\u003e25 mm\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003ctd\u003e⌀ 4.5\/ ⌀ 5.0\u003c\/td\u003e\n\u003ctd\u003e30+ h\u003csub\u003eef \u003c\/sub\u003e\/ 30+ h\u003csub\u003eef\u003c\/sub\u003e\n\u003c\/td\u003e\n\u003ctd\u003e45+ h\u003csub\u003eef \u003c\/sub\u003e\/ 45+ h\u003csub\u003eef\u003c\/sub\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePFI-90N\u003c\/td\u003e\n\u003ctd\u003ePOLYAMIDE\u003c\/td\u003e\n\u003ctd\u003eT40\u003c\/td\u003e\n\u003ctd\u003e25 mm\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003ctd\u003e⌀ 4.5\/ ⌀ 5.0\u003c\/td\u003e\n\u003ctd\u003e30+ h\u003csub\u003eef \u003c\/sub\u003e\/ 30+ h\u003csub\u003eef\u003c\/sub\u003e\n\u003c\/td\u003e\n\u003ctd\u003e80+ h\u003csub\u003eef \u003c\/sub\u003e\/ 70+ h\u003csub\u003eef\u003c\/sub\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n\u003cb\u003e\n\u003cbr\u003e\n\u003c\/b\u003e\n\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-pfi1.png?v=1759230755\"\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-pfi2.png?v=1759230755\"\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-pfi3.png?v=1759230756\"\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/lv-import-pfi4.png?v=1759230756\"\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1) Insert the anchor into the insulation covered with plaster\u003c\/td\u003e\n\u003ctd\u003e2) Screw the anchor into the insulation covered with plaster\u003c\/td\u003e\n\u003ctd\u003e3) Secure the element using a screw with the recommended diameter and length\u003c\/td\u003e\n\u003ctd\u003e4) The element is correctly installed in the insulation with the help of the PFI anchor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\n\u003cb\u003eApplication:\u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInstallation of outdoor lamps, wires, mailboxes, and other lightweight objects\u003c\/li\u003e\n\u003cli\u003eAttachment of decorative and technical elements to insulated facades\u003c\/li\u003e\n\u003cli\u003eSuitable for both new constructions and renovations, where the facade is insulated with EPS, PUR, or wool\u003c\/li\u003e\n\u003cli\u003eIdeal complement to ETICS systems\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4PRO","offers":[{"title":"Default Title","offer_id":56272643162457,"sku":"PFI","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0997\/9481\/files\/spiralveida-dibelis-elemntu-stiprinasanai-siltumizolacija.png?v=1759308270"}],"url":"https:\/\/ott-dansk.manta.link\/collections\/facadeisoleringsdyvler.oembed","provider":"Ottensten","version":"1.0","type":"link"}